Photo-video rendering plug-in
This topic has been viewed 2473569 times and has 259 replies
Re: Photo-video rendering plug-in
Excellent. Just need someone to try it on a Mac now.
- dorin
- Advanced Member
- Posts: 840
- Joined: Thu Apr 24, 2014 9:14 am
- Country: Vatra Dornei, Suceava, Romania
Re: Photo-video rendering plug-in
Linux debian
A computer program does what you tell it to do, not what you want it to do. Murphy's Law
When all else fails, read the instructions. Murphy's Law
If you don't like "AS IS", DIY. Dorin's law
When all else fails, read the instructions. Murphy's Law
If you don't like "AS IS", DIY. Dorin's law
Re: Photo-video rendering plug-in
I can confirm that the software runs OK on Windows 10 64bit. I got a bit optimistic and tried to render with my beloved PVR 2.6.2, but Dobry showed me the finger. That was expected.
I also tried the native Yafaray with Photon Mapping. It rendered the picture, but strangely some shadows got bright yellow colour. No idea why.
Those were my 5 cents. Thank You guy's.
I also tried the native Yafaray with Photon Mapping. It rendered the picture, but strangely some shadows got bright yellow colour. No idea why.
Those were my 5 cents. Thank You guy's.
Re: Photo-video rendering plug-in
the updated PVR is in the capable hands of sjb007 for fine tuning/testing/adjusting 
Windows 64bit | Intel i7 | SH3D 8.0 + Plugins
Re: Photo-video rendering plug-in
2.6.2? I thought 2.8 was the latest? Or did something change from 2.6.2 - 2.8 that made you stick on the older version? How did DD3D show you the finger? It's important to understand that the changes I made in DD3D are to the regular built-in render panel. The PVR plugin is distinct,and I've made no changes to that.GudmHr wrote: Fri Nov 13, 2026 11:55 pm I can confirm that the software runs OK on Windows 10 64bit. I got a bit optimistic and tried to render with my beloved PVR 2.6.2, but Dobry showed me the finger. That was expected.
I also tried the native Yafaray with Photon Mapping. It rendered the picture, but strangely some shadows got bright yellow colour. No idea why.
Those were my 5 cents. Thank You guy's.
I'd need to see a comparison between SH3D and DD3D for a scene where you are seeing "bright yellow". The inbuilt renderers (SunFlow and Yafaray) used a hard coded turbidity of 6 which is quite high. I left that default value in place for backward compatibility, but added option that allowed you to change it up (stronger yellow, less blue) or down (less yellow, stronger blue) for the skylight. That was pretty much the only "change", so I'm not sure how that could be a change to make your images yellow. Unless you are comparing the yellow of the inbuilt render panel with the output from the PVR plugin. I don't know if the PVR plugin has possibly changed how the images are rendered. [One eternity later...] I've reread your post, and see you specifically mention Photon Mapping for your yellow issue. For me photon mapping doesn't work at all. I get a plain black window, no CPU usage, no progress. Nothing. I get the same result in original 7.5 SH3D as well. This might be specific to Linux. Does the original SH3D with Photon Mapping give a better result? Understand, I cannot test this at all at the moment. It would be useful to know if we've actually broken something rendering related with the updates that is suddenly making things yellow.
The fact that you can run and get renders out of the basic app is good information though. Still waiting on a brave Mac user.
As to progress on the other stuff, I went slightly off the boil on that stuff. Xlance has done a lot of changes in the stuff he sent me. Huge diffs, lots of changes, no commit logs or structure, and incomplete parts. Getting it cleaned up and organised to be proper commits is not a lot of fun. Code review was throwing a lot of question marks as well.
Re: Photo-video rendering plug-in
[sigh] One quick check and PEBKAC (problem encountered between keyboard and chair).
I have the photomapping working for both SH3D and DD3D. That mode requires causticsPhotons to have a minimum value. For me caustics is a specific thing (water, light refracting through glass) so I didn't realise this is needed for this mode. In testing between SH3Dand DD3D it appears to give the same image in both, with no obvious yellowing of shadows that I can see. I'd need to see a comparison between images from the two applications. Just remember 6 for turbidity, and 0.35 for ozone (if you have those options) in DD3D.
I have the photomapping working for both SH3D and DD3D. That mode requires causticsPhotons to have a minimum value. For me caustics is a specific thing (water, light refracting through glass) so I didn't realise this is needed for this mode. In testing between SH3Dand DD3D it appears to give the same image in both, with no obvious yellowing of shadows that I can see. I'd need to see a comparison between images from the two applications. Just remember 6 for turbidity, and 0.35 for ozone (if you have those options) in DD3D.
- GaudiGalopin3324
- Advanced Member
- Posts: 764
- Joined: Sat Aug 13, 2022 9:58 am
- Country: Russia
Re: Photo-video rendering plug-in
version 2.8 has a serious flaw. There is only time until the end of rendering. And after an incomplete download, the incomplete picture disappears. There is no understanding at all how long the download took in the end. And in version 2.7 there are two scales - both from start and time to finish. And after completion, the download time is shown. And most importantly, if you stop rendering in the middle, the picture remains on the screen. It can even be studied in fragments. This is a very important function. I don't know what's in version 2.6. My advice is to try to use the version with two timescales and a picture capture function in the middle of the process. It's in PVR 2.7.2.6.2? I thought 2.8 was the latest? Or did something change from 2.6.2 - 2.8 that made you stick on the older version?
Re: Photo-video rendering plug-in
PVR v2.8 works ok on my side, couldn't replicate/find any error
Windows 64bit | Intel i7 | SH3D 8.0 + Plugins
Re: Photo-video rendering plug-in
Sorry for late reply, guys. DD3D simply came up with a box saying it could not render when I tried PVR 2.6.2 with photon map.
The reason I use PVR 2.6.2 is that it's the last version EnkoNyito made, before he started rolling back most of the additions he had made to the plugin.
When he published PVR 2.8, most of the additions had been rolled back to make it more comparable to the built-in version by E. Puybaret.
I use only Yafaray SPPM or PM render methods, mainly the former. I have not tried PVR 2.7, but from the last posts from EnkoNyito I took it so that he had already
removed the SPPM by then, as it is gone in PVR 2.8. For me the pathtracing method is a no-go.
Thank you , guys!
The reason I use PVR 2.6.2 is that it's the last version EnkoNyito made, before he started rolling back most of the additions he had made to the plugin.
When he published PVR 2.8, most of the additions had been rolled back to make it more comparable to the built-in version by E. Puybaret.
I use only Yafaray SPPM or PM render methods, mainly the former. I have not tried PVR 2.7, but from the last posts from EnkoNyito I took it so that he had already
removed the SPPM by then, as it is gone in PVR 2.8. For me the pathtracing method is a no-go.
Thank you , guys!
Re: Photo-video rendering plug-in
Well I didn't download the other package <native Yafaray something>, so that is very likely the reason for the yellow effect.
Anyway here are some images:
Anyway here are some images:
- Attachments
-
- Test_SH3D_PVR262_SPPM.png (553.91 KiB) Viewed 8 times
-
- Test_SH3D_native_PM.png (536.16 KiB) Viewed 8 times
-
- Test_DD3D_native_PM.png (536.33 KiB) Viewed 8 times