Elevated Stage

[llstiles]

I'm new to Sweet Home 3D, so this might be a redundant post.

I am documenting a 50' x 100' recreation hall in our campground. Then in the future we can move tables and chairs in different locations and have documentation.

There is a 28'W x 18'D x 28"H stage at the front of the hall. I tried adding 28" walls but could not figure out how to put a floor on them. Also tried adding a level but that was at the height of the 11' walls.

There should be a way, I think! Any help would be appreciated! Les

[Keet]

You were correct in using a level. You can double-click on the level tab and adjust the elevation to 28".
You can read my manual Levels explained to learn how elevations, heights, and floor thicknesses are related.

[llstiles]

Thanks, that was a BIG help! Your manual really explained Levels well.

Les