Print at Feb 2, 2026, 4:03:39 PM
Posts: 30   Pages: 3   [ 1 2 3 | Next Page ]
View all posts in this thread on one page
Posted by Mike53 at Jun 16, 2020, 12:16:09 PM
A cabin in the countryside
On this project i decided where i wanted the cabin before what the cabin will end up looking like.

Front


Front


Rear


Rear


Now to start making doors and windows smile

Mike

Posted by VeroniQ at Jun 16, 2020, 5:01:06 PM
Re: A cabin in the countryside
Nice place for a sweet cabin!!

Posted by Mike53 at Jun 16, 2020, 8:52:53 PM
Re: A cabin in the countryside
Thank You VeroniQ.

Posted by Mike53 at Jun 16, 2020, 8:56:20 PM
Re: A cabin in the countryside
Managed to get the front door made, and a water barrel stand with a shelf.
2 images of the front entrance





Mike

Posted by Xiste at Jun 16, 2020, 9:21:38 PM
Re: A cabin in the countryside
Wow!
You're onto something really nice here Mike.
This is impressive!

Where do you picture this location?
Scotland maybe? Or Switzerland, Austria, New Zealand? Perhaps Sweden....or could it be Norway?


Xiste

Posted by Mike53 at Jun 19, 2020, 2:19:40 PM
Re: A cabin in the countryside
A couple of views of the outside now. Without the scenery as it slows my pc too much

Front



Rear



Thank you Xiste, comments are appreciated.
Certainly thinking northern Scandinavia, maybe even Alaska

Mike

Posted by VeroniQ at Jun 21, 2020, 12:24:39 PM
Re: A cabin in the countryside
Lovely! Very "cinematographic"... It could be like the beginning place of a western film...

Posted by Mike53 at Jun 21, 2020, 4:52:08 PM
Re: A cabin in the countryside
Thank you VeroniQ, I'll add a few more images later, several mods to the decking, elevation and texture, windows and steps have all changed since these renders

Posted by Mike53 at Jun 28, 2020, 4:48:44 PM
Re: A cabin in the countryside
Started work on the kitchen cabinets, kinda farmhouse theme.



Posted by Mike53 at Jun 28, 2020, 10:24:08 PM
Re: A cabin in the countryside
More cabinets.



And a couple showing some detail.
In the 1st we see the small pillar, 1 each side of the sink, and the rounded edge to the work top



In the 2nd we see the pillars separating the lower cabinets.

.
I may replace all the handles yet, i used the spheres from the library, unfortunately the object itself appears to have an area of shadow which takes away from the affect i want, so they may get changed to cylinders.
The only item used that did not come from SH3D is the mixer tap, it came from Trimble.

Posts: 30   Pages: 3   [ 1 2 3 | Next Page ]