Russia
Joined: Aug 13, 2022
Post Count: 569
Status:
Offline
how to practice spiritualism using SH3D? There are serious problems..
Hi everybody. I tried to create a magical mirror corridor to communicate with ghosts. But no! On the third cycle of reflections, the program gives a failure ((. Two cycles of reflections are not enough. For a session of spiritualism, you need a lot more cycles, otherwise the ghost does not come. Is there a solution to this serious problem? For example: A mirrored door opposite the mirror above the sink. And a black square appears.. Help.
Russia
Joined: Aug 13, 2022
Post Count: 569
Status:
Offline
Re: how to practice spiritualism using SH3D? There are serious problems..
I'm disappointed. Where there are two, there are three... Why is there a limit of reflections in the mirror for two cycles? Why spare the processor? As a result, no communication with interesting personalities from the past ((
France
Joined: Nov 7, 2005
Post Count: 9426
Status:
Offline
Re: how to practice spiritualism using SH3D? There are serious problems..
Sorry for the bad communication, but reflections must be limited to avoid infinite computing! If you're a programmer, you may increase the number of reflections with SunFlow renderer by modifying the parameter set in PhotoRenderer class but from the tests I made you can't use a very large value. With YafaRay renderer, I don't know.
----------------------------------------
Emmanuel Puybaret, Sweet Home 3D creator
Romania
Joined: Apr 24, 2014
Post Count: 676
Status:
Offline
Re: how to practice spiritualism using SH3D? There are serious problems..
Be careful what you wish for! It might come true.
And a black square appears.. Help.
It is a door through which an angry Ukrainian could enter. Then you will really cry for help. This tread will be moderated.
---------------------------------------- A computer program does what you tell it to do, not what you want it to do. Murphy's Law When all else fails, read the instructions. Murphy's Law If you don't like "AS IS", DIY. Dorin's law
Russia
Joined: Aug 13, 2022
Post Count: 569
Status:
Offline
Re: how to practice spiritualism using SH3D? There are serious problems..
unfortunately I'm not a programmer. But if the program had at least 10 reflection cycles, the processor would not overheat. Maybe. But a picture would be acceptable. It's a pity. Okay, I will avoid such angles. In any case, thanks for the advice!
