Dec 15, 2025, 6:14:05 PM
|
Sweet Home 3D Forum » List all forums » » Forum: Features use and tips » » » Thread: Printing Issue |
|
| Print at Dec 15, 2025, 6:14:05 PM | View all posts in this thread on one page |
| Posted by Lyrx at Jun 11, 2017, 2:35:17 PM |
|
Printing Issue After printing a blueprint, the image is extremely small. When I enlarge the image on the printer, the printout has very thick lines and all the detail is lost. Even the dimensions are not useable. I'm using HP Envy and HP laser printers. Thanks for any input and especially a solution. |
| Posted by Sevano at Jun 14, 2017, 3:28:51 PM |
|
Re: Printing Issue If printing on 8 X 10 paper, go to File > Page Setup. Then change the scale to 1/108 or 1/110. |
| Posted by Lyrx at Jun 21, 2017, 3:16:19 PM |
|
Re: Printing Issue Thankyou. That worked. |
|
|
Current timezone is GMT Dec 15, 2025, 6:14:05 PM |