Canada/Québec
Joined: Jul 26, 2020
Post Count: 31
Status:
Offline
Fictional house for role-playing
A project I started on October 15, 2013. During an RP I realized I needed a reference of some kind for the house my character lived in. So first I needed a house plan witch I found on Dessins Drummond. I then contacted them to know if it was ok to use the plan for my project. After that started the fun of making the said house.
My first attempt was far from perfect, all the walls had the same thickness. Of course, I learned how to use the program over the years and keep editing the house as I learn to do stuff.
My next challenge is with the roof, as I never tried to make one. I have to figure out how tall to make my slop walls... I do know how to make them I just don't know how tall I should make my triangle since I want them to look as close to my model.
Inch dimention: Basement: Ground floor/First floor: First floor/Second floor: Meter dimention: Basement: Ground floor/First floor: First floor/Second floor:
----------------------------------------
I'm more comfortable writing in English, but I can also write in French. ,___, (OvO) Hoot /)_) " "
Custom furniture I made for the living room, except for the bottom shelves, that you can found in the Blend Swap section. The TV that you can found in the Scopia section. I used a frame to make the electric fireplace.
In case this image break too: https://sta.sh/08hwkr7bdnp
----------------------------------------
I'm more comfortable writing in English, but I can also write in French. ,___, (OvO) Hoot /)_) " "
Canada/Québec
Joined: Jul 26, 2020
Post Count: 31
Status:
Offline
Re: Fictional house for role-playing
It’s been a while since I last update you on my house project.
So I decided to make a new SH3D file. I didn’t remember if the file I was working on was from 2013 or later. So I just started over to be safe. I have redone all the wall, and when I was done, I looked at my basement stair, and just thought that maybe I could add some storage there. So here the result:
